Cetcon Building Technologies Private Limited
ISO 9001:2015 Certified
Ahmedabad, Gujarat
Send SMS
Send E-mail

Wall Putty

Providing you the best range of wall putty sf, waterproof wall putty, coarse putty uc, cement wall putty, polymer putty and acrylic polymer emulsion with effective & timely delivery.
Get CALLBACK

Wall Putty SF

Wall Putty SF
 
Get Best Quote
Approx. Rs 1,145 / BagGet Latest Price

Product Details:
Minimum Order Quantity25 Bag
ColorWhite
Packaging Size40 kg, 20 kg, 5 kg & 1 kg
Packing Size40 Kg, 5 Kg, 20 Kg, 1 kg
CategoriesWall Coating
BrandCetcoat
State/FormPowder
Surface of ApplicationWall

SF Wall Putty

White Cement Polymer based Wall Putty for Silky finish (SF).

Description:
  • Cetcoat SF wall putty is a polymer modified white cement based wall putty, specially developed as finishing coat to cover up the major undulations and pinholes to level the surface. .

Advantages:
  • Ideal for internal external surfaces.
  • Excellent resistance to water
  • Does not require curing after application.
  • No requirement of primer reduces paint consumption.
  • Superior Paint finish, economical easy to use.

Area of application:
  • All type of plaster and concrete wall
  • Ceilings and Renovation of old building.

Direction of use:

New Surface:
  • Remove dust, dirt, and foreign matter.

Old unpainted Surface:
  • The surface should be free from loose particles, grease and any other foreign materials.
  • Remove all foreign and loose materials from the wall surface with help of emery stone, putty blade or wire brush and clean the surface with water.
  • In case of cracks or voids, it should be repaired by application of mix of 3 part cetcoat SF and 1 part cetcrete Latex.

Old Painted Surface:
  • Scrub the surface with coarse wire brush / sand paper and clean thoroughly so that it is free from old paint/dust particles till the cementitious plastered surface is seen.

Very Rough Surface:
  • If surface plaster is rough, apply 1 st cetplast UC level the surface. Cure the surface for 2 days, before starting putty application.

Very smooth Surface:
  • If the surface is very smooth either old or new, scraping the surface with emery stone paper is recommended before putty application.

Efflorescence/ Salt disposition:
  • Due to salty water or salts in sand/bricks, problem of efflorescence is observed; in that case, plastered surface should be treated with mild acid for 30 min, wash the surface thoroughly after that so no acid remains on the wall. It is highly recommended to use cetcrete Latex 1 to 2 kg per 20 kg putty along with water.

Mixing:
  • Mix cetcoat SF wall putty and 35-40% of water by volume to stiff consistency manually or by using suitable mixer.
  • For 40 kg cetcoat SF wall putty, 14-16 litres of water are advisable.
  • Leave the mixture for 5 to 10 minutes for polymerisation and remix.
  • Use within 90 minutes. Mix the product in such quantities that it can be used in specific time.

Application Process:
  • The surface should be moderately rough and in just-wet condition (SSD condition)
  • Apply 1 st coat of cetcoat SF wall putty (1.5 mm thickness) using a blade/spatula on the wall with bottom to up direction.
  • Apply 2nd coat of cetcoat SF wall putty (1 mm thickness) after 4 to 6 hours in other direction.
  • Allow complete drying for 3 days and then use fine emery paper to remove application marks, if any

Precaution & Safety:
  • Cetcoat SF contains eco-friendly fillers and additives, however being white cement based, it is alkaline and hence it is advisable to avoid direct eye and skin contact. In case of eye contact, flush with clean water at least for 15 minutes and seek medical help if burning continues. It is recommended to keep it out of reach of children.

Coverage:
  • 500 to 600 sq. ft. per 40 kg bag for thickness of 1.5 mm. Although, the coverage area would depend on the surface quality.

Additional Information:
  • Item Code: 717
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mundra
  • Production Capacity: 8000 M. T.
  • Delivery Time: 15 days
  • Packaging Details: 1 kg 5 kg, 20 kg & 40 kg
Yes! I am Interested
View PDF
Get CALLBACK

Waterproof Wall Putty

Waterproof Wall Putty
 
Get Best Quote
Approx. Rs 1,545 / BagGet Latest Price

Product Details:
Minimum Order Quantity25 Bag
State/FormPowder
CategoriesWall Coating
Packing Size1 kg, 40 Kg
ColorWhite
Surface of ApplicationWall
BrandCetcoat Lotus
Raw MaterialPolymer
Packaging Size1, 20 and 40 kg

Waterproof Wall Putty Lotus

White cement & polymer based waterproof Wall Putty for external surface.

Description:
  • CETCOAT Lotus wall putty is a polymer modified white cement based wall putty, specially developed as ultra-white finishing coat to cover up the major undulations and pinholes to level the surface.

Advantages:
  • Ideal for internal & external surfaces.
  • Excellent resistance to water.
  • Does not require curing after application.
  • Ultra-white finish, no requirement of primer & reduces paint consumption.
  • Superior Paint finish, economical & easy to use.

Area of application:
  • All type of plaster and concrete wall.
  • Ceilings
  • Renovation of old building

Direction of use:

New Surface:
  • Remove dust, dirt, and foreign matter.

Old unpainted Surface:
  • The surface should be free from loose particles, grease and any other foreign materials.
  • Remove all foreign and loose materials from the wall surface with help of emery stone, putty blade or wire brush and clean the surface with water.
  • In case of cracks or voids, it should be repaired by application of mix of 3 part cetcoat SF and 1 part cetcrete Latex.

Old Painted Surface:
  • Scrub the surface with coarse wire brush / sand paper and clean thoroughly so that it is free from old paint/dust particles till the cementitious plastered surface is seen.

Very Rough Surface:
  • If surface plaster is rough, apply 1 st cetplast UC level the surface. Cure the surface for 2 days, before starting putty application.

Very smooth Surface:
  • If the surface is very smooth either old or new, scraping the surface with emery stone paper is recommended before putty application.

Efflorescence/ Salt disposition:
  • Due to salty water or salts in sand/bricks, problem of efflorescence is observed; in that case, plastered surface should be treated with mild acid for 30 min, wash the surface thoroughly after that so no acid remains on the wall.
  • It is highly recommended to use cetcrete Latex 1 to 2 kg per 20 kg putty along with water.

Mixing:
  • Mix cetcoat Lotus wall putty and 35-40% of water by volume to stiff consistency manually or by using suitable
  • mixer.
  • For 40 kg cetcoat Lotus wall putty, 14-16 litres of water are advisable.
  • Leave the mixture for 5 to 10 minutes for polymerisation and remix.
  • Use within 90 minutes. Mix the product in such quantities that it can be used in specific time.

Application Process:
  • The surface should be moderately rough and in just-wet condition (SSD condition)
  • Apply 1 st coat of cetcoat Lotus wall putty (1.5 mm thickness) using a blade/spatula on the wall with bottom to up direction.
  • Apply 2nd coat of cetcoat Lotus wall putty (1 mm thickness) after 4 to 6 hours in other direction.
  • Allow complete drying for 3 days and then use fine emery paper to remove application marks, if any

Precaution & Safety:
  • Cetcoat Lotus contains eco-friendly fillers and additives, however being white cement based, it is alkaline and
  • hence it is advisable to avoid direct eye and skin contact. In case of eye contact, flush with clean water at least for
  • 15 minutes and seek medical help if burning continues. It is recommended to keep it out of reach of children.

Coverage:
  • 500 to 600 sq. ft. per 40 kg bag for thickness of 1.5 mm. Although, the coverage area would depend on the surface quality

Additional Information:
  • Item Code: 817
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mundra India
  • Production Capacity: 8000 M T
  • Delivery Time: 15 days
  • Packaging Details: 40 kg & 1 kg
Yes! I am Interested
View PDF
Get CALLBACK

Coarse Putty UC

Coarse Putty UC
 
Get Best Quote
Approx. Rs 675 / BagGet Latest Price

Product Details:
Minimum Order Quantity40 Bag
State/Form Powder
Packaging Size (ex. 1L or 1Kg)25 kg
Categories Wall Putty, Wall Coating, Building Coating
ColorWhite
BrandCetplast
Raw MaterialWhite cement and Polymer based
Packing Size25 kg

Plaster Cum Putty

Polymer-based undercoat (UC) Unique 2 in 1 application Plaster-cum-Wall Putty

Description:
  • Cetplast UC is a versatile facing material that can be applied to directly over smooth concrete surface without hacking or undulating surface and can be used as base coat /undercoat for interiors or as final finish for exteriors. Cetplast UC is polymer modified Grey cement based specially 2-in-1 thin application Plaster-cum-Wall Putty in 3 to 6 mm thickness in two coat against conventional plater 12 mm plus Putty 1.5 mm

Advantages:
  • Under Coat over plaster or Directly on Concrete surface.
  • Excellent Adhesion with substrate
  • Reduce water absorption and Crack resistant.
  • Superior mat finish, Durable & easy to use.
  • Economical 3 to 6 mm thickness against conventional plaster 12 mm
  • Does not require curing after application.Ideal for Internal, External wall surface & Ceiling.
  • Available in Light Grey Finish & White finish.

Area of application:
  • All type of concrete surface.
  • All type of plaster and concrete wall.
  • Ceilings
  • Inner and outer wall.
  • Ideal for heritage buildings repair.

Direction of use:

Surface Preparation:
  • The surface should be free from loose particles and any other foreign materials.
  • Remove all foreign and loose materials from the wall surface with help of emery stone, putty blade or wire brush and clean the surface with water.

Mixing:
  • Mix 25 kg cetplast UC & 6 to 6.5 litres of water to stiff consistency by using suitable mixer.
  • Leave the mixture for 5 minutes for polymerisation and remix.
  • Use within 90 minutes. Mix the product in such quantities that it can be used in specific time.

Application Process:
  • Apply 1 st coat of cetplast UC (3 mm thickness) using a blade/spatula on the wall with bottom to up direction.
  • Apply 2 nd coat of cetplast UC (1.5 to 3 mm thickness) after 6 to 8 hours in other direction.
  • For better silky finish for interiors wall use 2 nd coat cetcoat SF
  • Allow complete drying for 3 days.
  • Don’t use fine emery paper to remove application marks, take care during application to avoid mark.

Precaution & Safety:
  • Cetplast UC Plaster-cum-Wall Putty contains eco-friendly fillers and additives, however being white cement based, it is alkaline and hence it is advisable to avoid direct eye and skin contact. In case of eye contact, flush with clean water at least for 15 minutes and seek medical help if burning continues. It is recommended to keep it out of reach of children.

Coverage:
  • 50 to 60 sq. ft. per 25 kg bag for thickness of 3 mm. Although, the coverage area would depend on the surface quality.

Additional Information:
  • Item Code: 617
  • Port of Dispatch: MUNDRA
  • Production Capacity: 9000 tons
Yes! I am Interested
View PDF
Get CALLBACK

Cement Wall Putty

Cement Wall Putty
 
Get Best Quote
Approx. Rs 225 / PouchGet Latest Price

Product Details:
Minimum Order Quantity50 Pouch
ColorWhite
Packing Size5 Kg
Putty FormPowder
Packaging Size1kg, 5kg
Raw MaterialPolymer
CategoriesWall Coating
BrandCetcoat

Cement Wall Putty

White cement & polymer based waterproof Wall Putty for Ineternal and external surface.

Description:
  • CETCOAT wall putty is a polymer modified white cement based wall putty, specially developed as ultra-white finishing coat to cover up the major undulations and pinholes to level the surface.

Advantages:
  • Ideal for internal & external surfaces.
  • Excellent resistance to water.
  • Does not require curing after application.
  • Ultra-white finish, no requirement of primer & reduces paint consumption.
  • Superior Paint finish, economical & easy to use.

Area of application:
  • All type of plaster and concrete wall.
  • Ceilings
  • Renovation of old building

Direction of use:

New Surface:
  • Remove dust, dirt, and foreign matter.

Old unpainted Surface:
  • The surface should be free from loose particles, grease and any other foreign materials.
  • Remove all foreign and loose materials from the wall surface with help of emery stone, putty blade or wire brush and clean the surface with water.
  • In case of cracks or voids, it should be repaired by application of mix of 3 part cetcoat SF and 1 part cetcrete Latex.

Old Painted Surface:
  • Scrub the surface with coarse wire brush / sand paper and clean thoroughly so that it is free from old paint/dust particles till the cementitious plastered surface is seen.

Very Rough Surface:
  • If surface plaster is rough, apply 1 st cetplast UC level the surface. Cure the surface for 2 days, before starting putty application.

Very smooth Surface:
  • If the surface is very smooth either old or new, scraping the surface with emery stone paper is recommended before putty application.

Efflorescence/ Salt disposition:
  • Due to salty water or salts in sand/bricks, problem of efflorescence is observed; in that case, plastered surface should be treated with mild acid for 30 min, wash the surface thoroughly after that so no acid remains on the wall.
  • It is highly recommended to use cetcrete Latex 1 to 2 kg per 20 kg putty along with water.

Mixing:
  • Mix cetcoat wall putty and 35-40% of water by volume to stiff consistency manually or by using suitable
  • mixer.
  • For 40 kg cetcoat wall putty, 14-16 litres of water are advisable.
  • Leave the mixture for 5 to 10 minutes for polymerisation and remix.
  • Use within 90 minutes. Mix the product in such quantities that it can be used in specific time.

Application Process:
  • The surface should be moderately rough and in just-wet condition (SSD condition)
  • Apply 1 st coat of cetcoat Lotus wall putty (1.5 mm thickness) using a blade/spatula on the wall with bottom to up direction.
  • Apply 2nd coat of cetcoat Lotus wall putty (1 mm thickness) after 4 to 6 hours in other direction.
  • Allow complete drying for 3 days and then use fine emery paper to remove application marks, if any

Precaution & Safety:
  • Cetcoat Lotus contains eco-friendly fillers and additives, however being white cement based, it is alkaline and
  • hence it is advisable to avoid direct eye and skin contact. In case of eye contact, flush with clean water at least for
  • 15 minutes and seek medical help if burning continues. It is recommended to keep it out of reach of children.

Coverage:
  • 500 to 600 sq. ft. per 40 kg bag for thickness of 1.5 mm. Although, the coverage area would depend on the surface quality

Additional Information:
  • Item Code: 817B
Yes! I am Interested
View PDF
Get CALLBACK

Polymer Putty

Polymer Putty
 
Get Best Quote
Approx. Rs 595 / BagGet Latest Price

Product Details:
Minimum Order Quantity50 Bag
ColorWhite
Packaging Size20 kg and 40 kg
Brandcetcon
CategoriesWall Coating
Pot Life90 min
Packing Size20 Kg
Raw MaterialPolymer
Putty FormPowder

Polymer Putty

White Cement Polymer Wall Putty.

Description
  • Cetcoat wall putty is a polymer modified white cement based wall putty, specially developed as finishing coat to cover up the major undulations and pinholes to level the surface. .
Advantages
  • Ideal for internal external surfaces.
  • Excellent resistance to water
  • Does not require curing after application.
  • No requirement of primer reduces paint consumption.
  • Superior Paint finish, economical easy to use.

Area of application
  • All type of plaster and concrete wall
  • Ceilings and Renovation of old building.

Additional Information:
  • Item Code: 717C
Yes! I am Interested
View PDF
Get CALLBACK

Acrylic Polymer Emulsion

Acrylic Polymer Emulsion
 
Get Best Quote
Approx. Rs 340 / kgGet Latest Price

Product Details:
Minimum Order Quantity200 kg
Paint base typeWater Based Paint
Application methodBrush
Brandcetcrete
Form of PaintLiquid
State/FormLiquid
Packaging Size1kg, 4 kg & 20 kg
FinishHigh Gloss
Is It WaterproofWaterproof
ColorWhite
Packaging TypeCan

Cetcrete PDP+Polymer Emulsion for Paints, Distempers & Putty

Advantage :
  • Suitable for all type of paint, Distempers & Putty
  • Excellent scrub resistance with special Crosslinking Polymer.
  • Excellent resistance to water.
  • Superior finish, Economical cost cutting & easy to use.
Direction for use :
  • Cetcrete PDP+ should be added with the measured gauge water.
  • It should not be added to the directly in paints, Distempers or Dry powder of Wall Putty.
  • 1 kg cetcrete PDP+ for 20 kg paints or Distempers and 40 kg wall putty cetcoat SF or Lotus should be adjusted by 35-40% of water to stiff consistency by using suitable mixer.
  • Leave the mixture for 5 minutes , remix again & use
Yes! I am Interested
View PDF
Explore More Products
X
Looking for “Wall Putty”?
Find Us Devraj Sinh Gohil (Head Operations) 54, Siddhi Vinayak Estate, Santej Vadsar Road, Ahmedabad - 382721, Gujarat, India
SEND SMS
SEND E-MAIL
Share Us: